PTC Pro / Engineer Wildfire v4.0 (5.0) (часть 4)

[anickolsky]

thanks a lot anickolsky

i have another question?
do you have the material for weldment using creo

http://gigapeta.com/dl/2758316a768f0a

 

[sarpedaniel88]

thank you for your help

 

[sarpedaniel88]

Sorry if i'm asking too much but can you post these again please
внезапно...
1.
390-T3902 (Introduction).rar
http://gigapeta.com/dl/2502157ae9dc46
2.
390-T3903 (Advanced Modeling). …
http://gigapeta.com/dl/2502158ae117d2
3.
390-T3904 (Advanced Assembly D …
http://gigapeta.com/dl/2502168a560da8
4.
390-T3905 (Detailing).rar
http://gigapeta.com/dl/2502171acedda1
5.
390-T3906 (Surfacing).rar
http://gigapeta.com/dl/2502172a0321be
6.
390-T3907 (Sheetmetal Design). …
http://gigapeta.com/dl/2502173a351cf7
7.
390-T3908 (Milling).rar
http://gigapeta.com/dl/2502174ae3953d
8.
390-T3909 (Cabling using Creo …
http://gigapeta.com/dl/2502177add1f03
9.
390-T3910 (Piping using Creo P …
http://gigapeta.com/dl/2502179af8e1b7
10.
390-T3911 (Introduction to Cre …
http://gigapeta.com/dl/2502180a860c1f
11.
390-T3912 (Introduction to Cre …
http://gigapeta.com/dl/2502181aea9317
12.
390-T3913 (Layout).rar
http://gigapeta.com/dl/2502182a9f57d7
13.
390-T3915 (Flexible Modeling u …
http://gigapeta.com/dl/2502186a433833
14.
390-T3916 (Introduction to Cre …
http://gigapeta.com/dl/2502187a81dad0
15.
390-T3917 (Introduction to Cre …
http://gigapeta.com/dl/2502193abc5db7
16.
390-T3922 (Behavioral Modeling …
http://gigapeta.com/dl/2502195ab5beb2

--------------------------------------------------------------------------------
Last edited by anickolsky; 05-06-2012 at 23:38.

 

[anickolsky]

Sorry if i'm asking too much but can you post these again please
------------------------------
Last edited by anickolsky; 05-06-2012 at 23:38.

it's there http://dumpz.ru/showpost.php?p=600072&postcount=254

 

[z8374z]

thanks a lot ,anickolsky
can you give me
i really need it

1. Windchill 9.1 на Linux - курс для поклонников мощнейшего палавого секса с Linux!
http://gigapeta.com/dl/998788a3147a6

if you have that for 10.x for linux,it will be better,upload it.tks

i want to intsall wc in linux,wait for you advice .

2. Pro/INTRALINK 9.1, Datecode: M070

 

[orhanobay]

не ну рас такая пьянка пошла, то:
Creo_2.0 PTC Trainings (вкл файлы примеров где есть)
1.
Creo_2.0 PTC Trainings.part4.r …
http://gigapeta.com/dl/2757253a96d0a2
2.
Creo_2.0 PTC Trainings.part3.r …
http://gigapeta.com/dl/2757277ab34075
3.
Creo_2.0 PTC Trainings.part2.r …
http://gigapeta.com/dl/2757286a23d033
4.
Creo_2.0 PTC Trainings.part1.r …
http://gigapeta.com/dl/2757293ae71edb

waiting for premium occount

 

[sarpedaniel88]

do you have something about NC Machining TURNING

Добавлено через 45 секунд
??????????????????

 

[anickolsky]

do you have something about NC Machining TURNING

Добавлено через 45 секунд
??????????????????

if Milling is a kind of Turning - use this set
1.
T3908_Milling.zip
http://gigapeta.com/dl/2772782a3f6394
2.
T3908-390-02_HTML.zip
http://gigapeta.com/dl/2772783a64330a
3.
T3908-390-02_Overheads_EN.zip
http://gigapeta.com/dl/2772784a63bd18
4.
T3908-390-02_SG-Ins_EN.zip
http://gigapeta.com/dl/2772785af0e481

if no - use it anyway

 

[jipsy]

jonnyyy we need gigapeta premium account

 

[Kirill-kir]

Jonny, выложи пожалуйста eDrawings, для возможности установки на Creo 2.0
(почему-то eDrawings v9.0 не видит при установке путей Creo 2.0. Может есть новая версия или какая-то особенность установки?)

 

[sarpedaniel88]

Does any one have Creo™ 2.0 Parametric and Simulate Configuration Options?

 

[sarpedaniel88]

I have tried milling but at work i need Turning using creo parametric 2.0
thanks a lot for your help

 

[jurij_w]

Jonny, выложи пожалуйста eDrawings, для возможности установки на Creo 2.0
(почему-то eDrawings v9.0 не видит при установке путей Creo 2.0. Может есть новая версия или какая-то особенность установки?)

Можешь зайти на сайт разработчика и скачать самостоятельно http://edrawings.geometricglobal.com/Downloads/eDrawings+for+Pro_ENGINEER/index.aspx
Работает и без ключа.

 

[anickolsky]

Turning with Creo 2.0
Update from ProE Wf4 to Creo 2.0

1.
390-T3925.zip
http://gigapeta.com/dl/2773082ad76d48
2.
T3901-390-03_HTML.zip
http://gigapeta.com/dl/2773083a9bdd86
3.
T3901-390-03_Overheads_EN.zip
http://gigapeta.com/dl/2773084aacc8db
4.
T3901-390-03_SG-Ins_Lec_EN.zip
http://gigapeta.com/dl/2773085a691ae0
5.
T3925-390-01_Overheads_EN.zip
http://gigapeta.com/dl/2773086a6b85b3
6.
T3925-390-01_SG-Ins_EN.zip
http://gigapeta.com/dl/2773087a1cc0b3

 

[yakamoto69]

anickolsky can you please share

Interactive Surface Design using Creo Parametric 2.0
Freestyle Surface Design using Creo Parametric 2.0
Mechanism Design using Creo Parametric 2.0
Mechanism Simulation using Creo Parametric 2.0

Thank you