PTC Pro / Engineer Wildfire v4.0 (5.0) (часть 4)

[2hexahadron]

Please full fill my request too.turning and mold tutorials.i missed them by few days.

for turning

390-T3925.zip

T3901-390-03_HTML.zip

T3901-390-03_Overheads_EN.zip

T3901-390-03_SG-Ins_Lec_EN.zip

T3925-390-01_Overheads_EN.zip


T3925-390-01_SG-Ins_EN.zip


for mold

T3920_Mold_Creo2.zip

T3920-390-02_HTML.zip

T3920-390-02_Overheads_EN.zip

T3920-390-02_SG-Ins_EN.zip

 

[yuanpingding]

http://gigapeta.com/dl/3516229a29471d

Thank you very much.
But ,Please share T3923-390-Course-lab-files.zip and T3923-390-02-Html.zip with me,ok?
Thanks.
Yours,sincere yuanpingding!

 

[anickolsky]

Tips & Tricks: Deal with problematic geometries on model - для тех, кто в теме. три небольших ролика об этом.
1.
03_cut&export&import.zip
http://gigapeta.com/dl/3536074a4b66ef

2.
01_replace_surface.zip
http://gigapeta.com/dl/3536078a8621b3

3.
02_cut&remove.zip
http://gigapeta.com/dl/3536080a8da4e3

 

[yakamoto69]

Tips & Tricks: Deal with problematic geometries on model - для тех, кто в теме. три небольших ролика об этом.
1.
03_cut&export&import.zip
http://gigapeta.com/dl/3536074a4b66ef

2.
01_replace_surface.zip
http://gigapeta.com/dl/3536078a8621b3

3.
02_cut&remove.zip
http://gigapeta.com/dl/3536080a8da4e3

Thanks anickolsky very helpful! If you have more tips & tricks videos especially for manufacturing and import geometry please share.

 

[botanmax]

Уважаемый anickolsky, выложите плиз дистриб WNC 10.1. Старые ссылки более не актуальны.

С gigapeta.com качать как раз месяц на их скорости. Нельзя ли через другой обменник или торрент? если есть возможность



Заранее Спасибо!

 

[Israr Ullah]

-----------------------------------------------------------------------------------
Release Creo 1.0 ALIAS Isogen Piping - I-Run 4.3.0
1.
file MED-60342-CD-380_F000.001 http://gigapeta.com/dl/1735473ab997c8 Done 2. file MED-60342-CD-380_F000.002 HTTP :/ / gigapeta.com/dl/1735474a095286 Done 3. file MED-60342-CD-380_F000.003 http://gigapeta.com/dl/1735475a9494fc Done 4. file MED-60342-CD-380_F000.CRC http:/ / gigapeta.com/dl/1735476ae70aa8
------------------------------------------------------------------------------------
anickolsky, above links are no more active. Please upload again.

Thanks

 

[atreyur20]

Please! Anyone could help me! I'm looking for 390-T3907 (Sheetmetal Design), all the links about this matter doesn't work.
Thanks

 

[yuanpingding]

anickolsky，have you top-down design tutorials？

I'm looking for it
thanks

 

[anickolsky]

Please! Anyone could help me! I'm looking for 390-T3907 (Sheetmetal Design), all the links about this matter doesn't work.
Thanks

file T3907-390-01_HTML.zip
http://gigapeta.com/dl/3579248ac728e0
done
2.
file T3907-390-02_Overheads_EN.zip
http://gigapeta.com/dl/3579249a89bd9a
done
3.
file T3907-390-02_SG-Ins_EN.zip
http://gigapeta.com/dl/3579250ab64077

 

[anickolsky]

VM PDS Windchill R10.2
http://gigapeta.com/folder/5df27c731957f57b

 

[2hexahadron]

Any tutorials on 5 axis machining in pro/nc

 

[amirtag]

Поделитесь пожалуйста следующим материалом : T3924_Mech_Simulation.zip
Спасибо!

 

[anickolsky]

1.
file T3907-390-01_HTML.zip
http://gigapeta.com/dl/3600576ac728e0
done
2.
file T3907_Sheetmetal.zip
http://gigapeta.com/dl/3600577ac3d436
done
3.
file T3907-390-02_SG-Ins_EN.zip
http://gigapeta.com/dl/3600578ab64077
done
4.
file T3907-390-02_Overheads_EN.zip
http://gigapeta.com/dl/3600579a89bd9a
done
5.
file T3924-390-02_HTML.zip
http://gigapeta.com/dl/3600580a90d9f0
done
6.
file T3924-390-02_SG-Ins_EN.zip
http://gigapeta.com/dl/3600582a597b94
done
7.
file T3924-390-02_Overheads_EN.zip
http://gigapeta.com/dl/3600583adc828a

 

[markey]

VM PDS Windchill R10.2
http://gigapeta.com/folder/5df27c731957f57b

Можно выложить на торренте? А то 144 части качать можно недели 2.
Заранее благодарю.

 

[Jonny]

markey,
трехдневный Премиум на гигапете стоит 150 руб... Или принцип "халява only.." не позволяет?